How To Use Artificial Turf Seam Tape?

In the process of laying imitation grass, a perfect joint can make the whole lawn look natural, greatly improving the aesthetics and practicality. Today, we will reveal the professional skills of Linwoo imitation lawn grass joints in detail, so that you can easily master the key to build a high-quality lawn.

 

First, pre-preparation is the key

 

 

Grass tuft treatment: If you just remove one outer grass tuft and make a seam, the grass blades at the edge will be squeezed together, which looks unattractive. By removing three outer grass clusters and the edge of the plant, you can get a row of vertical grass blades, which is easy to align perfectly with the spliced grass blades.

 

Precise control of spacing: For example, if the spacing of the grass clusters of the selected fake grass is three-eighths of an inch, then the splicing of the two rows of grass clusters should keep the same spacing to ensure the overall coordination and unity.

 

Second, accurate alignment and adjustment

 

 

Clever folding and repositioning: When the second piece of grass is spliced, fold one side back to make the grass roll narrower, fan the air underneath, which can gently reposition the grass blades for subsequent operations.

 

Trimming and fitting the tufts: Fold the outer blade back to the edge of the seam and remove the three outer tufts, keeping the grass blades tight against the spliced blade and ensuring that the excess backing can be trimmed off along with the waste material for a clean splice.

 

Spacing alignment fine check: Two pieces of grass edges trimmed and aligned to ensure that the spacing of grass clusters and the entire lawn consistent, the ideal gap should be one-eighth to one-quarter inch, and no excess backing residue, up and down to double-check to ensure that there is no error.

 

Third, laying joint tape

 

 

Cutting Tape: Cut the seam tape accurately according to the length of the seam, make sure the length is just right, no waste of material and can completely cover the seam area.

 

Place the tape: Fold back the faux grass 12 inches on each side and place the seam tape smoothly along the center of the seam to avoid wrinkles or folds and to ensure that the tape fits tightly with the grass surface.

 

Corner fixing to ensure stability: Insert nails at the corners of the seam tape to firmly fix it in the corresponding position, preventing the tape from shifting during subsequent operations and affecting the splicing effect.

 

Fourth, the skills of applying glue

 

 

Glue application method: segmented glue application work, the glue to zigzag pattern evenly poured in the center of the seam tape, to ensure that the glue is evenly distributed, can fully cover the surface of the tape.

 

Application tools: Use a flat applicator to carefully apply the end of the seam tape, with gentle and meticulous movements, so that the glue is spread evenly to avoid inconsistencies in thickness.

 

Glue Thickness Control: Remove all glue "puddles" and make sure there are no dry spots on the seam tape. Be aware that the glue expands as it cures, and that applying too much thickness may seep out through the drainage holes, so be sure to maintain a thin, even coat.

 

Excess glue treatment: If there is too much glue at the end of the joints, just drag it to the base material, this treatment will not cause any harm to the lawn, but also to ensure that the glue is applied to the neatness.

 

Five, splicing process and compaction

 

 

Center closing skills: For longer seams, pull both ends backward, carefully close the two pieces of grass from the center, as if zipping up the zipper, operate to ensure that both sides are evenly closed to prevent one side of the blade of grass from being stuck by the glue over the front.

 

Closing speed and observation: The closing process should be carried out slowly, eyes on the front a few inches, always pay attention to the alignment of the two pieces of grass, to ensure that the precision and aesthetics of the splicing.

 

Timing of placing weights: When one side is closed, place a weight in the center in time to prevent the grass from lifting and to provide a stable foundation for the other side of the closing operation.

 

Grass blade adjustment method: If the grass blade is pulled too open, it can be rolled slowly to make it easy to operate, but before it is ready to lay the joints, it is necessary to avoid the grass flipping over to the glue to ensure a smooth and error-free splicing process.

 

Sixth, final compaction and inspection

 

 

Seam compaction operation: After the seam is completed, compaction of both ends is done with force and pressure is applied along the seam to help the glue penetrate into the grass tufts and backing to make the splicing more solid and stable.

 

Spacing Review Procedure: Before placing infill bags or 12-inch wide boards (with infill bags placed on top), double-check the spacing again to make sure there is no displacement or change from previous operations and to ensure the overall flatness and consistency of the lawn.

 

Cure Time Guarantee: Place a heavy object along the entire seam for at least 45 minutes to allow the glue to fully cure and form a strong, indissoluble bond between the two pieces of plastic grass, ensuring the durability and longevity of your lawn.

 

At Linwoo, we are committed to providing you with the highest quality synthetic lawn products and the most professional laying instructions. If you have any questions about artificial grass laying, selection or our products, or need free samples or free estimates, please feel free to contact us!