How To Install Artificial Turf On Soil？

Below is a detailed step-by-step guide to installation to help you successfully complete this project.

Step 1: Planning and Preparation
Before you begin the installation, you need to define the size and shape of the installation area and decide on the type of imitation grass to be used. Clearing the site is a top priority, removing all rocks, weeds and debris to ensure a clean, level work surface. Prepare all the required tools such as shovels, compactors, weed control fabric and nails.

Step 2: Excavate the ground
Use a shovel or lawn mower to remove the top layer of soil from the ground; digging should be 3 to 4 inches deep. This depth provides enough room for a base layer to be laid and for drainage, and it also prevents the lawn from becoming uneven after installation. Make sure the excavated area is free of roots or other obstructions that could interfere with subsequent operations.

Step 3: Install the drainage system
In order to prevent waterlogging problems, it is important to ensure a good drainage system. Drainage pipes can be laid or drainage slopes can be installed according to the terrain. The effectiveness of the drainage system directly affects the service life of the lawn, so it is important to handle it carefully.

Step 4: Laying Grass Cloth
Laying a drop cloth is an important step that prevents weeds from growing underneath your artificial lawn grass and provides it with a more stable foundation. Lay the weed barrier fabric flat on the ground, making sure it covers the entire installation area, and secure it with nails to avoid movement or wrinkling.

Step 5: Laying the base layer
The base layer usually consists of gravel or sand and should be laid 2 to 3 inches thick. Spread the material evenly over the grass control fabric and then use a compactor to firm it up to create a flat, solid base layer. This process is key to ensuring a flat and durable lawn, so be sure to do it carefully.

Step 6: Laying the fake lawn
Before laying, unfurl the lawn and leave it for a few hours to return to its natural state. Then, measure and cut it to fit the size of the installation area. When laying, make sure the lawn seams are aligned and use nails or staples to secure the edges. Once laying is complete, comb the grass strands with a brush to keep them upright and looking natural.

Step 7: Secure the Edges
Edge fixing of your plastic grass is vital for overall stability. Use 8 to 13 cm long nails or staples to secure the fake lawn edge to the ground. Make sure the cutting blades are sharp and cut precisely and neatly, keeping the lawn 0.6 to 0.7 centimeters away from surrounding objects such as walls or sidewalks.

Step 8: Spreading the infill
Spreading the infill is the final step in fake lawn grass installation. Infill is usually silica sand or rubber granules that add softness and stability to the lawn. Use a spreader to spread the infill evenly, then use a brush to work the infill into the grass strands. This operation helps the grass strands stay upright and enhances the realism of the lawn.

Step 9: Final Inspection and Cleanup
After completing the above steps, carefully inspect every corner of your lawn to make sure there are no missing or loose areas. Clean off any trash and debris from the installation process and comb through the grass strands once again to give your lawn surface a neat and tidy look.

Step 10: Maintenance and upkeep
Even though imitation grass is low maintenance, regular cleanup and upkeep is still necessary. Regularly inspect the surface of your lawn, remove debris and blades, and reapply infill as needed to keep your lawn looking its best.

With these steps, you can successfully install an artificial lawn that is beautiful, durable, and easy to maintain. The process takes some time and effort, but the end result will brighten up your outdoor space and make an ideal green recreational area.